How to Clean Tile Grout on Floors and in Showers

featured 8074

Hey there! If you’ve ever stared at shower or floor grout wondering if it can ever look new again, this guide is for you. Grout cleaning takes a bit of time and effort, but it’s very rewarding — your tiles will look refreshed and much cleaner when you’re done.

I recently watched a viral video showing a surprising grout-cleaning trick, then tried my own approach inspired by the many tips I found online. The results were satisfying, but the process underscored that grout cleaning is rarely as quick or simple as some articles make it sound. It does require patience, the right supplies, and some elbow grease. Below is a clear, practical, step‑by‑step account of how I cleaned grout in a shower and on tile floors, along with tips that helped the most.

How to clean grout on tile floors and in showers

How to Clean Grout in Shower and on Floors

I was excited to finally have tiled bathrooms with grout and glass shower doors, but I quickly realized I didn’t know the best way to keep those finishes looking fresh. After reading many sources and testing methods, I settled on a reliable routine that works for both shower walls and floor tiles. It’s not magic, but it is effective when done carefully.

hilarious guide to grout cleaning

Before you start, gather the right supplies. Having good tools makes the job far easier and helps you achieve consistent results.

supplies for cleaning shower grout inside a shower

Supplies for cleaning tile grout

  • baking soda
  • hydrogen peroxide
  • white vinegar
  • spray bottle
  • sponge or cloth
  • grout brush — this is essential; a stiff-bristled grout brush works best
  • rubber gloves
  • window washing squeegee or a shower squeegee for rinsing

With supplies in hand, I got to work. A few practical tips up front: stand on a towel or a small dry tub to avoid slipping and to keep your feet dry when working in a tub. Wear gloves to protect your hands, and play some music to make the task less tedious.

how to clean grout out of shower tiles by standing on a towel in the tub

How to clean grout in the shower

1. Spray the grout

Mix equal parts white vinegar and water in a spray bottle and mist the grout lines. The vinegar helps break down soap scum and surface dirt, which prepares the grout for deeper cleaning.

2. Apply a cleaning paste

Make a paste by mixing baking soda with enough hydrogen peroxide to form a spreadable consistency. Apply the paste directly to grout lines with a grout brush or a small spatula. This combination is mildly abrasive and helps lift stains without harsh chemicals.

baking soda and hydrogen peroxide cleaning shower tiles

Dip your grout brush into the paste and scrub the grout lines. Expect some splatter — wear old clothes or an apron. Scrubbing can be physically demanding, especially on vertical surfaces, so take breaks if needed.

cleaning shower tiles grout with a paste of baking soda and hydrogen peroxide

3. Let the paste work

Allow the paste to sit for about 20–30 minutes. This dwell time lets the hydrogen peroxide and baking soda penetrate and lift embedded dirt and stains.

4. Rinse and wipe clean

Rinse the paste away with water and use a squeegee or a wet cloth to wipe down the tiles. If standing in the tub is a concern, place a dishpan or towel under your feet to keep them dry while you rinse. Repeat scrubbing on stubborn areas as needed.

How to clean grout on floor tiles

Cleaning floor grout follows a similar routine but is often easier because you can work from above the tiles. Here’s the straightforward sequence I used:

  1. Pour a stream of hydrogen peroxide along the grout lines.
  2. Sprinkle baking soda directly onto the hydrogen peroxide.
  3. Let the mixture sit for about 30 minutes to lift dirt.
  4. Scrub the grout with a grout brush, using firm, back-and-forth strokes.
  5. Wipe the area clean with a damp cloth and rinse thoroughly.

hilarious guide to grout cleaning

The results were noticeable. Dirty grout brightened significantly after a careful cleaning session. It’s gratifying to see the contrast between before and after — but keep in mind very old or deeply stained grout may require a second round or a professional treatment.

Before:

dirty grout lines on floor

After:

after cleaning grout on tile floors

In short: grout cleaning takes work but follows simple steps — apply an effective cleaning mixture, let it sit, scrub with a proper grout brush, and rinse. Regular maintenance, like wiping tiles after showers and doing a deeper clean every few months, will help keep grout looking good longer.

how to clean grout

More cleaning tips and ideas

  • Clean glass shower doors regularly to prevent soap scum buildup.
  • Use microfiber cloths for efficient wiping and minimal streaking.
  • Address spills or stains on grout promptly to avoid deep set discoloration.
  • Consider sealing grout after a thorough cleaning to slow future staining.

For more home cleaning tips, recipes, and ideas, consider subscribing to home newsletters and blogs for regular updates and printable resources.

If you have favorite grout-cleaning tips or tricks that worked well for you, please share them. There’s always something new to learn when it comes to keeping tile and grout looking their best.

img 8074 11