Craft three or four simple, quick, single-layer, no-sew Norwex face masks using the Norwex Window Cloth with these straightforward actions.
Recently, I noticed the CDC advises wearing face coverings in public settings, and they even offer guidance on homemade cloth face protection.
I found a guide on how to construct a DIY Norwex Cloth face mask and documented the process.
The tightly woven window cloth is what Norwex is utilizing as they start manufacturing personal face masks; testing indicates it captures 60% of particles that are .4 microns or larger.
(**Norwex personal face masks are anticipated to be available for purchase around May. Stock will be quite limited. To receive email updates on Norwex facemask availability immediately after announcements, please click here.)
While one mask can be made by folding the window cloth, the resulting mask is quite thick and warm. Through experimentation, I learned how to generate 3 or 4 single-layer masks from just 1 Norwex window cloth without any sewing required…
*Due to the window cloth's dense nature, employing only a single fabric layer is advised for this mask type.
Making DIY Single Layer No Sew Facemasks with a Norwex Window Cloth
Note: I am a Norwex independent consultant. This post also features affiliate links for your convenience when shopping.
You can view a video tutorial for these DIY Norwex Face Masks, or follow the written directions provided below.
Before step one, acquire a Norwex window cloth, or use an extra one you might already possess. If you are in Canada and need to order a Norwex window cloth, click here.
The following colors and designs of window cloth are currently in stock:
- 705011 – Wave pattern
- 1807- Pink
- 1914- Plum
- 1518- Purple
(Currently, my sales are restricted to Canadian clientele.)
Initial step: Slice the window cloth into strips of your chosen width.
For 4 face masks, the strips must measure 4.5 inches wide; for 3 masks, they should be 5.5 inches wide.
Use a straight edge ruler and marker to indicate your cut lines, then slice with a sharp pair of fabric scissors.
I created one of each size—a 4.5 inch strip for myself and a 5.5 inch one for my husband; the third mask is wider than 5.5 inches.
Step 2: Secure the cut edge or edges to stop the fabric from unraveling.
Several no-sew techniques exist for hemming fabric to prevent fraying, including:
- Apply fabric adhesive such as Fabric Fusion, Liquid Stitch, or No Sew, then fold the edge over to create a hem.
- Employing a glue gun; I tested this technique as demonstrated in the video at the 3:13 mark. **A note: I verified the adhesion of the hot glue gun glue by washing and drying the mask twice; it has held up well so far, though long-term durability remains untested.**
- Applying Heat and Bond and pressing with an iron in a hem. My Heat n Bond supply is quite dated! I discovered some excellent head n bond hem tape currently available online. See it here! Since Heat n Bond is designed for these specific tasks, I anticipate it will maintain its integrity long-term.
Should these items not be in your possession, I have located them for purchase online.
BROWSE No Sew Adhesives
Despite attempting the hot glue gun approach (viewable in the video at 3:13), my favored technique is unquestionably using Heat n Bond.
The Heat n Bond method is shown in the video at the 4:06 mark.
Here is how I executed the process:
Initially, I cut a narrow strip matching the fabric's length and ironed it on, ensuring the textured side faced down.
Subsequently, the paper backing was removed to expose the adhesive layer.
Similar to hemming with a sewing machine, you fold the edge over with the adhesive facing down, then iron it firmly.
The final outcome is a crisp, smooth, and level edge hem.
Place two hair ties or rubber bands at each end of the cloth, positioning them about one-third down.
Tuck the ends toward the rear center.
Use the rubber bands to secure the face mask around your ears.
Once all face masks are used, observe the suggested safety protocols.
I have read that caution is necessary when removing face masks, treating them as potentially contaminated. Here are some helpful guidelines:
- Grip the mask by the rubber bands and allow it to drop into a sink or your washing machine.
- It should be laundered following every single use.
- Ensure your hands are washed completely after handling the mask.
Interested in learning more about Norwex?
- My Top Norwex Items (and why I switched my cleaning routine entirely to Norwex)
- This month's Norwex customer deals and warehouse sale.
Become a VIP!
Join the VIP newsletter list to receive many useful and practical home insights. You will get crafting inspiration, recipes, budget-friendly home decor advice, and more! Additionally, gain exclusive entry to the Free Printable Library featuring printable art, calendars, gift tags, and more. Click the link below to join today!
